CONTENT:
40g powder + 20ml liquid

Proclinic reinforced zinc oxide cement is for temporary restorations and bases.

WAY OF USE:
Spatulate over a glass surface adding parts of the powder to the liquid until all the powder is added. Place the cement into a dried and retentive cavity. If the pulp is very closed, a base liner of calcium hydroxide or better calcium hydroxiapatite should be used. Mix two spoons of powder, with a drop
of liquid. Do not press the powder and remove the excess of powder with a spatula. The spoon is included in the kit. • If the mix is done on different proportions, the physical properties can vary.
PREPARATION:
Mix over a glass surface by a spatula, adding to the liquid small parts of the powder until all is added.
Spatulate until a uniform mass is obtained. The time of mixing should be not longer than 1 min. Place the cement into a dried and retentive prepared cavity. If the pulp is very closed or exposed, a calcium hydroxide can be placed. If the occlusion should be controlled, use a matrix in the usual way. Working time: 2,5 min. Setting time: 5,5 min.
PRECAUTIONS:
The Zinc oxide cement can interfere in curing resins.
In case of contact with eyes rinse android get medical attention. Keep the bottles tight closed.